11. Which of the following provide inter-switch VLAN communication?

    ISL
    VTP
    802.1Q
    802.3Z

2 only
1 and 3
2 and 4
2, 3 and 4

Show Answer

12. A switch has been configured for three different VLANs: VLAN2, VLAN3, and VLAN4. A router has been added to provide communication between the VLANs. What type of interface is necessary on the router if only one connection is to be made between the router and the switch?

10Mbps Ethernet
56Kbps Serial
100Mbps Ethernet
1Gbps Ethernet

Show Answer

13. Which of the following are benefits of VLANs?

    They increase the size of collision domains.
    They allow logical grouping of users by function.
    They can enhance network security.
    They increase the size of broadcast domains while decreasing the number of collision domains.
    They simplify switch administration.
    They increase the number of broadcast domains while decreasing the size of the broadcast domains.

1 and 5
2 and 4
1, 3 and 5
2, 3 and 6

Show Answer

14. Which of the following protocols are used to configure trunking on a switch?

    VLAN Trunk Protocol
    VLAN
    802.1Q
    ISL

1 only
3 only
3 and 4
1, 3 and 4

Show Answer

15. What VTP mode allows you to change VLAN information on the switch?

Client
STP
Server
Transparent

Show Answer

16. You connect a host to a switch port, but the new host cannot log into the server that is plugged into the same switch. What could the problem be?

The router is not configured for the new host.
The VTP configuration on the switch is not updated for the new host.
The host has an invalid MAC address.
The switch port the host is connected to is not configured to the correct VLAN membership.

Show Answer

17. Which of the following is an IEEE standard for frame tagging?

ISL
802.3Z
802.1Q
802.3U

Show Answer

Networking - Virtual LANs Question and Answer

Networking - Virtual LANs Question and Answer

Networking