Electrical Engineering- Electric Current and Ohm's Law

Electrical Engineering- Electric Current and Ohm's Law
61.

40 W bulb A will be least bright when

  • only keys k1 and k2 are open
  • only keys k2 is open
  • only keys k3 is open
  • all keys are closed.
Show Answer
62.

The power consumption of the circuit will be maximum when

  • key k1 and k3 are closed and k2 is open
  • key k1 is closed, k2 and k3 are open
  • key k1 and k2 are closed and k3 is open
  • all the keys are closed.
Show Answer
63. Which of the following lamps will have least resistance at room temperature ?
  • 200 W, 220 V
  • 100 W, 220 V
  • 60 W, 220 V
  • 25 W, 220 V.
Show Answer
64.

The value of supply voltage for 500 W ,5 ohm load is

  • 500 V
  • 100V
  • 50 V
  • 10V.
Show Answer
65.

Which resistor will be physically larger in size ?

  • 10 ohm, 50 W
  • 100 ohm, 10 W
  • 1 kohm, 1 W
  • 10 Mohm, 1/ 2 W.
Show Answer
66. Four resistances R1 , R2, R3 and R4 are connected in series against 220 V supply. The resistances are such that R1 > R2 > R3 > R4. The least power consumption will be in
  • resistor R1
  • resistor R2
  • resistor R3
  • resistor R4.
Show Answer
67.

100 resistors of 100 ohms each arc connected in parallel. Their equivalent resistances will be

  • 10,000 ohms
  • 100 ohms
  • 1 ohm
  • 1/ 10000 ohm.
Show Answer
68.

For a fixed supply voltage the current flowing through a conductor will decrease when

  • cross-sectional area of the conductor is increased
  • length of the conductor is increased
  • length of the conductor is reduced
  • cross-sectional area is increased and length is decreased.
Show Answer
69.

Two 1 kilo ohm, 1/2 W resistors are connected in series. Their combined resistance value and wattage will be

  • 2 kohm, 1 / 2 W
  • 2 kohm, 1 W
  • 2kohm, 2 W
  • 1 kohm, 1 / 2 W
Show Answer
70.

The resistance of 100 W, 200 V tamp is

  • 100 ohm
  • 200 ohm
  • 400 ohm
  • 1600 ohm.
Show Answer
Questions and Answers for Competitive Exams Various Entrance Test