Electronics-Parallel Circuits

Electronics-Parallel Circuits
11. A parallel circuit is also used as a divider for:
  • conductance
  • voltage
  • power
  • current
Show Answer
12. What is RT for a 12 k, a 4 k, and a 3 k resistor in parallel?
  • 1.5 k
  • 2 k
  • 6.3 k
  • 19 k
Show Answer
13. What is the total resistance of four 1 k parallel-connected resistors?
  • 200 ohms
  • 250 ohms
  • 400 ohms
  • 4 kilohms
Show Answer
14. Which are the better test devices used to isolate a suspected open component within a parallel circuit?
  • a voltmeter or an ohmmeter
  • neither an ammeter nor a voltmeter
  • a wattmeter or a voltmeter
  • an ammeter or an ohmmeter
Show Answer
15. Which is considered to be the common reference for a parallel circuit?
  • Voltage
  • Current
  • Power
  • Resistance
Show Answer
16. After which time constant can a capacitor be considered to be fully charged?
  • first
  • third
  • fifth
  • seventh
Show Answer
17. You could increase the time constant of an RC circuit by
  • adding a resistor in parallel with the circuit resistance
  • adding a capacitor in parallel with the circuit capacitance
  • increasing the amplitude of the input voltage
  • exchanging the position of the resistor and capacitor in the circuit
Show Answer
18. A capacitor's rate of charge is considered:
  • magnetic
  • a current block
  • exponential
Show Answer
19. A resistor and an output capacitor form a series circuit with a square wave applied. The circuit is:
  • an integrator
  • a differentiator
  • a multiplier
  • a divider
Show Answer
20. If an open capacitor is checked with an ohmmeter, the needle will:
  • stay on zero
  • stay on infinity
  • move from zero to infinity
  • move from infinity to zero
Show Answer
Electronics
Questions and Answers for Competitive Exams Various Entrance Test